REASONS TO BUY
Easy to use
Quick to warm
Works with various bottles
REASONS TO AVOID
Expensive
Harder to clean
Baby Brezza Safe and Smart Review
Easy warmer with two modes but it is expensive and can overheat bottles
Credit: Abriah Wofford
RELATED: The Best Bottle Warmers
The Skinny
The Baby Brezza Safe and Smart is a bottle warmer with steam and water bath technologies for quick or "steady" heat. This warmer works with a variety of bottle sizes and materials including glass, but it is not compatible with breastmilk storage pouches, which makes it a poor choice for parents who primarily breastfeed. It can heat bottles quickly, but it can also overheat just as fast if you fail to remove it from the chamber at the end of the heating cycle. We like that it has an automatic shut off and audible beep, but worry parents could get distracted and end up with a bottle that's too hot. This warmer is also one of the most expensive options in the review, so the budget-minded should beware.
Compare to Similar Products
 This Product
Baby Brezza Safe and Smart | |||||
|---|---|---|---|---|---|
| Awards |  | |  |  | |
| Price | $80 List $79.99 at Amazon | $58 List $35.99 at Amazon | $75 List $74.99 at Amazon | $35 List | $26 List $18.97 at Amazon |
Overall Score  |
|||||
| Star Rating | |||||
| Pros | Easy to use, quick to warm, works with various bottles | Simple to operate, versatile, consistent temperatures | Water bath, user-friendly, versatile, timer in minutes | Simple, safe, keep bottle warm for up to an hour | Inexpensive, travel friendly, easy to use |
| Cons | Expensive, harder to clean | Average heat time, frequent maintenece | Expensive, no end of cycle beep, multiple cleaning steps | Slower | No auto-shutoff, only works for one bottle |
| Bottom Line | Easy warmer with two modes but it is expensive and can overheat bottles | Bottle warmer with average heating time, but safe and effective for breastmilk | Consistent, simple, and works with any bottle | Excellent value with a simple design that is easy to use | An innovative way for on-the-go families to heat baby's milk |
| Rating Categories | Baby Brezza Safe an... | Tommee Tippee 3-in-... | Kiinde Kozii | Chicco NaturalFit | Tommee Tippee Trave... |
| Warming Efficiency (25%) | |||||
| Ease Of Use (30%) | |||||
| Health/Safety (40%) | |||||
| Ease of Cleaning (5%) | |||||
| Specs | Baby Brezza Safe an... | Tommee Tippee 3-in-... | Kiinde Kozii | Chicco NaturalFit | Tommee Tippee Trave... |
| Heat Technology | Water Bath and Steam | Water Bath | Water Bath | Water Bath | Water Bath |
| Temp or Timer Based | Timer | Timer | Timer | Temperature | N/A |
| Auto Shut Off | Yes | Yes | Yes | Yes | No |
| Audible Beep | Yes | Yes | No | Yes | No |
| Water Resevoir | Yes | No | Yes | Yes | No |
| Wide Bottle Capacity | Yes | Yes | Yes | Yes | Yes |
| Compatible w/ Glass | Yes | Yes | Yes | Yes | Yes |
| Compatible w/ Breast Pump Bags | Yes | Yes | Yes | No | Yes |
| Time to Warm to 99F | 6:40 min:sec | 7:40 min:sec | 12:00 min:sec | 9:15 min:sec | 5:38 min:sec |
| Wait Time Between Warmings | Allow the bottle warmer to cool - takes about 30 min | Not listed | If Kozii feels warm around the base (from recent use), decrease warming time by 30 seconds. | Allow bottle warmer to cool completely (approx 30 min) | None |
| Dimensions | 11.25"H x 5.8"L x 6.25"W | 7.5"H x 6"L x 5"W | 6"H x 6.4"L x 4.7"W | 6"H x 5.5"L x 5.25"W | 7.75"H x 3.5"L x 3.5"W |
| Temp. & Time at Auto Shut-Off w/ Warmer Chart Recommended Setting (4oz Refrig. Milk in Glass w/ Silicone Sleeve) | Steady Warm Mode: 4:55 min:sec 85F Quick Warm Mode: 2:40 min:sec 74F |
5:00 min:sec 86F | 5:30 min:sec 79F | 9:00 min:sec 94F | NA |
| Max Temp if Left in Warmer 12 minutes | 112F | 109F | 94F | 104F | 111F |
Show full specification detailsHide full specification details
Our Analysis and Test Results
Baby Brezza's main company tagline is that they save parents time - "what will you do with the extra time?" The company prides itself on making products with fewer parts that require less effort from parents.
Performance Comparison
The Baby Brezza Safe and Smart is a dual technology warmer that has steam and water bath options.
Credit: Abriah Wofford
Health and Safety
With increased potential for steam related incidents, the Brezza earns a fair score for health and safety, but the lowest among all metrics for this unit. This product has two heat modes, quick heat, and steady heat. The quick heat cycle is faster, but the final temperature of the bottle is lower.
The Brezza steam option hurt its overall safety score thanks to the potential for burns and overheating bottles.
Credit: Abriah Wofford
Using the steady heat mode yields, according to instructions, a temp of 91F in 4:55 minutes. If the bottle is left in the warmer after the end of the cycle, it can reach up to 114F in under 12 minutes. In as little as 7 minutes, the bottle reaches temperatures over 101F. This occurrence could happen if you have a crying baby or other things to tend to while the bottle warms. When used at maximum settings, the bottle contents reached 131F, which is far too hot and over the 104F benchmark where breastmilk begins to lose nutrients.
The buttons on the Brezza are easy to use thanks to well-identified buttons with few choices.
Credit: Abriah Wofford
Ease of Use
The Brezza is one of the easiest warmers to use, earning it a tiptop ranking in the metric of ease of use. The user manual for the Brezza is easy to read, has large font, and is straightforward. The unit has two warming modes depending on how fast you need the bottle warmed, and the user interface is simple and intuitive. This unit is compatible with bottles of various sizes and materials, including wide-bottles and glass.
The Brezza flip-top lid helps keep heat inside the chamber for more efficient heating, but it also means you need to be careful when opening the lid to avoid scalding.
Credit: Abriah Wofford
We like that Brezza has put the warming chart on the back of the warmer; this means there is nothing to lose or misplace and help is right where you need it when you need it. Filling the warmer with water to match the instructions is simple and varies only depending on which heating method you choose. The Brezza has an automatic shut-off and an audible beep when the heat cycle is over decreasing the chances of overheating. However, we caution parents to remain vigilant about bottles in the warmer as they overheat quickly in this unit if left in the chamber after the heat cycle is over.
We love the warming guide on the back of the Brezza and we wish all manufacturers would follow suit with this quick reference method.
Credit: Abriah Wofford
Warming Efficiency
The Brezza is an efficient heater with an above-average score for this metric. With two heat modes, this unit offers two options for speed that also translate to two different bottle content temperatures.
Following manufacturer instructions, the Brezza heats contents to 76F using the quick warm mode (steam heat) at 2:40 minutes. Using steady heat mode, you'll get a warmer bottle at 91F in about 4:55 minutes, faster than much of the water bath warmer choices in this review.
Testing Content Temperature
To ensure the contents aren't too hot, you should always test the liquid on the inside of your wrist before feeding your baby. After you warm the bottle, you should always swirl the bottle to mix in potential hot spots before testing. The liquid should be warm but not hot.
To ensure the contents aren't too hot, you should always test the liquid on the inside of your wrist before feeding your baby. After you warm the bottle, you should always swirl the bottle to mix in potential hot spots before testing. The liquid should be warm but not hot.
This warmer requires a complete cooling before you heat an additional bottle, so it isn't a good choice for parents of multiples. Theoretically, you could ignore the instructions and heat a subsequent bottle after the first, but it would likely be far too hot, potentially killing valuable nutrients in breast milk.
The cleaning instructions for the Brezza are easy to understand but the bottom of the chamber is impossible to wipe clean.
Credit: Abriah Wofford
Ease of Cleaning
The Brezza struggles somewhat in testing for cleaning, earning it a slightly above average score. While the daily upkeep consists of dumping the water and wiping clean, we weren't able to reach the bottom of the chamber, and you'll need to rely on rinsing to keep it clean. Rinsing doesn't seem like a good way to keep it properly cleaned. The descaling treatment includes running the unit on setting 5 with a vinegar/water mix.
Manufacturer's Video
—
Juliet Spurrier, MD and Wendy Schmitz
You Might Also Like
Honest, objective reviews. Led by a Pediatrician.
BabyGearLab was founded by a Pediatrician Mom with a mission to provide a reliable, independent, source of information to new parents. Our experts have tested thousands of baby and kids products to share key performance, health, and safety findings. We spend tens of thousands of dollars crash testing car seats to inform our ratings. And, we combine our review work with gobs of expert parenting advice. To assure complete independence, we buy all the products we test ourselves. No sponsored content. No ads. Just real, honest, side-by-side testing by people who care.
Learn More